Nasal Hoods for Nitrous Oxide: Silhouette, Single-Use and Autoclavable Compared
Silhouette, single-use standard hoods such as ClearView and Dynomite, or autoclavable double mask hoods? A practical guide for dental practices choosing a nasal hood for nitrous oxide sedation, with sizing, scavenging and stock planning.
For most dental practices offering relative analgesia, the nasal hood is the one piece of sedation equipment that touches every patient. This guide explains the three main types of nasal hood for nitrous oxide, how they compare, how to size patients, and what to check before you switch.
It is written for dentists, practice managers and sedation-trained clinicians reviewing their nasal hood for nitrous oxide delivery, whether you are setting up a new surgery, reordering the hoods you have always used, or weighing up a change.
The short version
There are three main types, and fit matters more than brand. Silhouette masks are single-use and come with their own disposable circuit, so everything that touches the patient's face is thrown away after each patient. Single-use standard hoods, such as Accutron ClearView and Matrx Dynomite, are thrown away after each patient, but the scavenging circuit tubing they fit onto is reused. Autoclavable double mask hoods, such as Porter and Matrx, are reprocessed between patients with a fresh inner liner. Choose the type that suits your circuit and infection control workflow, then size every patient with the correct sizer.
On this page
- What a dental nasal hood actually does
- The three types of nasal hood compared
- Silhouette single-use masks
- Single-use standard hoods: ClearView and Dynomite
- Autoclavable double mask hoods
- Single-use means single use
- How to size a nasal hood
- Scavenging checklist for your surgeries
- Cost per patient
- Planning consumable stock
- Switching hoods or systems
- Common questions
What a dental nasal hood actually does
A nasal hood sits over the patient's nose and connects to the sedation flowmeter through a breathing circuit. It has three jobs:
- Deliver fresh gas: the oxygen and nitrous oxide mix set on the flowmeter.
- Carry exhaled gas away: through the scavenging (vacuum) side of the circuit, so it is not released into the operatory.
- Stay out of the way: so the clinician has clear access to the oral cavity for the whole procedure.
All three depend on fit. That is why sizing and hood design matter as much as the flowmeter behind them.
The three types of nasal hood compared
Dental practices in Australia generally use one of three approaches. All three are in use in well-run practices. The right one depends on the circuit you already have, your infection control workflow and how many sedations you do.
| Silhouette single-use mask | Single-use standard hood | Autoclavable double mask | |
|---|---|---|---|
| Examples | Porter Silhouette 2 | Accutron ClearView, Matrx Dynomite | Porter autoclavable hood kit, Matrx autoclavable nasal hood |
| How it works | Low-profile mask with its own disposable breathing circuit | Disposable hood that fits onto a reusable scavenging patient circuit | Reusable outer hood with an inner liner against the patient's nose |
| Between patients | Discard mask and circuit | Discard the hood; reprocess or maintain the circuit per its instructions | Replace or reprocess the liner; reprocess the outer hood per its instructions |
| Tubing at the patient's face | Disposable. Discarded with the mask | Reusable circuit. Cleaned or reprocessed between patients per its instructions | Reusable circuit. Cleaned or reprocessed between patients per its instructions |
| Sizes | Paediatric, Small, Medium, Large | ClearView: Paediatric, Adult, Large Adult. Dynomite: Small, Medium, Large | Porter: Adult and Paediatric. Matrx: Paediatric, Medium, Large |
| Ongoing cost driver | One mask per patient, circuit included | One hood per patient, plus circuit reprocessing | Liners, reprocessing time and periodic hood replacement |
| Best suited to | Fast changeover and simple infection control, including on an existing flowmeter via a retrofit package | Practices already running a compatible scavenging circuit who want disposable hoods | Practices on a Porter or Matrx circuit with established reprocessing |
Silhouette single-use masks
The Silhouette 2 anaesthetic nasal hood is a low-profile mask designed to be used for one patient and then discarded. According to the manufacturer, the mask and its breathing circuit are both disposable, so there is no hood or circuit to clean between patients. Other features listed by the manufacturer include:
- A mask that flexes inward at the top to wrap around the nose
- Lightweight tubing that runs over the ears and under the chin, allowing head movement
- Colour-coded sizes, a mint scent, and a built-in capnography port for compatible monitors
- A profile that allows protective eyewear to sit over the mask
Why the disposable circuit matters
Infection control. With most nasal hood systems, the hood or liner is the only part replaced between patients. The circuit tubing that runs from the hood across the patient's face and head is reused, so it has to be cleaned or reprocessed between patients exactly as its instructions for use describe. With Silhouette, the patient-side tubing is part of the single-use mask, so every component that touches the patient's face goes in the bin after the appointment and there is no patient-contact tubing to reprocess.
Comfort and fit. A conventional scavenging circuit uses heavier gas tubing that sits on or around the patient's face and pulls on the hood as the patient moves. Silhouette's lightweight tubing runs over the ears and under the chin instead, so there is less weight on the mask, less to work around during the procedure, and the seal is easier to hold when the patient turns their head.
Because Silhouette brings its own circuit, it can also be a simple way to move to single-use hoods. See switching below.
Single-use standard hoods: ClearView and Dynomite
A single-use standard hood is a disposable nasal hood that fits onto a reusable scavenging patient circuit. You keep the circuit and throw the hood away after each patient. The circuit tubing near the patient's face is reused, so it needs cleaning or reprocessing between patients as its instructions describe. Accutron ClearView is a familiar choice in many Australian practices, and Mega Medical now stocks Matrx Dynomite as an alternative.
Accutron ClearView
According to Accutron's documentation, ClearView masks are single-use and use a mask-in-mask design: a clear outer mask, which lets the clinician see the patient breathing, over a soft inner mask that forms the seal. They come in Paediatric, Adult and Large Adult sizes, boxed in 12, in a range of colours and scents, with versions that include a capnography adapter. Accutron lists them as compatible with its ClearView scavenging circuits, PIP+ circuits and Porter Brown scavenging circuits, and with the Matrx scavenging system using an adapter.
Matrx Dynomite
According to the manufacturer, Matrx Dynomite hoods are single-use, latex-free and X-ray compatible. They come in Small, Medium and Large, in packs of 12 or 24, in strawberry or bubble gum scents, an assorted pack, or plain. Each hood is individually packed with a character sticker the patient can take home, which is removed before the hood is fitted. They are designed for Matrx Scavenger patient circuits and, with the Dynomite universal conversion kit, can be fitted to many other circuits.
Check your circuit before you switch hood brands. A single-use standard hood is only as good as its connection to the circuit. Tell us the make and model of your scavenging circuit and we will confirm which hoods fit directly and which need an adapter or the universal conversion kit before you order. To talk through the Dynomite range, get in touch or call 1300 881 824.
Autoclavable double mask hoods
The Porter system uses a "mask within a mask": a reusable outer hood with an inner liner that sits against the patient's nose. The Porter autoclavable hood kit includes one outer hood and three inner liners, and comes in adult and paediatric sizes. The inner liner can be autoclavable or a single-use disposable liner, available in packs of 12 in unscented and citrus options.
Matrx also makes an autoclavable nasal hood for practices running a Matrx circuit, available in Paediatric, Medium and Large.
This suits practices that already have a Porter or Matrx breathing circuit and in-line vacuum control, and that prefer a reusable outer hood with a disposable patient-contact component. See the full range of autoclavable nasal hoods and liners.
Single-use means single use
Whichever system you choose, follow the manufacturer's labelling. The ADA Guidelines for Infection Prevention and Control define a single-use item as one "specified by the manufacturer as being for use in a single visit".1 The Australasian College for Infection Prevention and Control is equally clear: devices labelled for single use should not be reprocessed or reused, and a facility that reprocesses them takes on the obligations of a manufacturer under the Therapeutic Goods Act 1989.2
In practice, a single-use mask, hood or liner goes in the bin after the patient, and any reusable hood or circuit tubing is cleaned and sterilised exactly as its instructions for use describe. If your team is unsure which components in your current setup are which, ask us. We can confirm against the manufacturer's documentation.
How to size a nasal hood
A good seal starts with the right size. Size names differ between brands, so do not assume a "Medium" in one range matches a "Medium" in another. A practical routine:
- Use sizers, not guesswork The Silhouette 2 retrofit package includes four colour-coded sizer masks, so the team can check fit before opening a patient mask. For other brands, use the manufacturer's sizing guide.
- Size to the nose, not the age A small adult may need a smaller size; a larger teenager may fit an adult size. Paediatric sizes are designed for children, such as the Silhouette 2 paediatric nasal hoods or the Matrx paediatric autoclavable hood.
- Check the seal before increasing nitrous oxide Look for the hood sitting evenly, with no gaps at the bridge of the nose or the cheeks, and the tubing resting comfortably.
- Re-check after the patient settles Patients often relax and shift position a few minutes in. A quick look at the hood is part of routine monitoring.
- Record the size and brand Noting both on the patient's record saves time at the next appointment, especially if you use more than one system.
Scavenging checklist for your surgeries
Scavenging protects your team from waste anaesthetic gas, and employers have duties under work health and safety law to manage workplace exposure to hazardous substances. Use this checklist when reviewing each surgery:
| Check | What to look for |
|---|---|
| Hood fit | Correct size, even seal, no lifting when the patient turns their head |
| Hood-to-circuit connection | Hood seated fully on the circuit, using the correct adapter or conversion kit if the brands differ |
| Vacuum connection | Scavenging line connected and set as specified in the system's instructions for use |
| Tubing | No kinks, splits or loose connections on the fresh gas or vacuum side |
| Patient behaviour | Encourage nose breathing and limit talking where practical, as mouth breathing bypasses the hood |
| Flowmeter and controls | Serviced to schedule; any automatic scavenging controls tested and alarms working |
| Wall outlets and pipeline | Scavenge and gas outlets inspected as part of your medical gas maintenance program |
For a broader look at choosing a flowmeter, see our guide to analogue and digital sedation flowmeters.
A new hood will not compensate for a flowmeter that is out of calibration or a scavenging line that has lost suction. Mega Medical services sedation flowmeters, regulators and medical gas outlets for dental practices. See our equipment servicing page to book.
Cost per patient
A rough guide to what the disposable part of each system costs per sedated patient, using Mega Medical prices excluding GST as at 13 November 2026 unless noted.
| Disposable | Pack price | Cost per patient | What's included |
|---|---|---|---|
| Silhouette 2, 24 pack | $299 to $349 | $12.46 to $14.54 | Mask and patient-side tubing. Nothing to reprocess |
| Silhouette 2, 12 pack | $189 to $199 | $15.75 to $16.58 | Mask and patient-side tubing. Nothing to reprocess |
| Silhouette 2 variety pack | $210.76 | $17.56 | Three of each size, mask and tubing |
| Matrx Dynomite, 24 pack | $207 | $8.63 | Hood only. Plus cleaning or reprocessing of the reusable circuit |
| Matrx Dynomite, 12 pack | $115 | $9.58 | Hood only. Plus cleaning or reprocessing of the reusable circuit |
| Accutron ClearView, 12 pack | $134.75 | $11.23 | Hood only. Plus cleaning or reprocessing of the reusable circuit. Typical Australian retail price, November 2026 |
| Porter disposable inner liner | $75.23 per 12 | $6.27 | Liner only. Plus the outer hood ($485.32 per kit, including three liners) and reprocessing of the hood and circuit |
Silhouette 24-pack prices vary by size: $299 for Paediatric and Small, $349 for Medium and Large. The lowest headline price per patient is not always the lowest real cost. When you compare systems, include the staff time, sterilisation cycles and consumables used to reprocess hoods and circuits, and the cost of replacing reusable components when they wear out.
Planning consumable stock
Running out of the right size mid-list is avoidable. A simple way to plan:
- Count sedations, not appointments. With any single-use hood you need one per sedated patient. For example, a practice doing 15 sedations a week needs 15 hoods, before allowing for a spare when a size doesn't fit first time.
- Split by size and keep a buffer. Order to the mix of children, smaller adults and larger adults you saw over the last three months, and hold a couple of weeks' stock of each size.
- For double mask systems, track liners the same way, and plan for periodic replacement of outer hoods according to the manufacturer's guidance.
Practices that see a mix of children and adults often keep a Silhouette 2 variety pack (three of each size) in each surgery, and buy the sizes they use most in packs of 12 or 24. Dynomite is also available in 12 and 24 packs, and in an assorted pack that covers more than one scent.
Switching hoods or systems
Most changes fall into one of three moves. In each case, the circuit decides what is possible.
- Same circuit, different single-use hood (for example, from ClearView to Dynomite): confirm whether your circuit accepts the new hood directly or needs an adapter or the Dynomite universal conversion kit.
- Autoclavable hoods to single-use: you may be able to keep your circuit and change to a compatible single-use standard hood, or move to Silhouette with its own circuit.
- Any system to Silhouette: you do not necessarily need a new flowmeter. The Silhouette 2 retrofit package is designed to connect the masks to an existing flowmeter and includes a cannula adapter, breathing bag cap, fresh gas and vacuum tubing, sizer masks and a tubing clip.
Compatibility depends on your exact setup, so tell us the make and model of your flowmeter and circuit and we will confirm before you order.
Reviewing the whole setup?
If you are looking at more than the hood, our checklist for dental practices considering nitrous sedation covers compliance, gas supply and long-term value.
Common questions
What are the main types of nitrous oxide nasal hood?+
Three: Silhouette single-use masks with their own disposable circuit; single-use standard hoods such as Accutron ClearView and Matrx Dynomite, which fit onto a reusable scavenging circuit; and autoclavable double mask hoods such as Porter and Matrx, which are reprocessed with a fresh inner liner.
What is the difference between ClearView and Dynomite hoods?+
Both are single-use hoods that fit onto a scavenging circuit. ClearView uses a clear mask-in-mask design in Paediatric, Adult and Large Adult sizes. Dynomite comes in Small, Medium and Large, is latex-free, and is designed for Matrx Scavenger circuits, with a universal conversion kit for other circuits. Check which fits your circuit before switching.
Can a single-use nasal hood be cleaned and reused?+
No. Items labelled single use should be discarded after one patient. Australian infection control guidance treats reprocessing a single-use device as a manufacturing activity regulated under the Therapeutic Goods Act.
Are scented nasal hoods available for children?+
Yes. Silhouette 2 masks have a mint scent, Porter paediatric disposable liners come in citrus, Dynomite comes in strawberry and bubble gum with an assorted option, and ClearView is offered in a range of scents. Unscented or plain options are available in each range.
Do I need a new flowmeter to use Silhouette 2 masks?+
Not necessarily. The Silhouette 2 retrofit package is designed to connect the masks to an existing flowmeter. Contact us with your flowmeter make and model and we will confirm compatibility.
Need help choosing?
If you would like help choosing between the three types, confirming circuit compatibility, or setting up a regular consumables order, call us on 1300 881 824 or get in touch. You can browse Silhouette nasal hoods, autoclavable nasal hoods or the full sedation nasal hoods and consumables range.
References
- Australian Dental Association. Guidelines for Infection Prevention and Control, 5th edition, 2024. ada.org.au
- Australasian College for Infection Prevention and Control. Position Statement: Single Use Devices, July 2025. acipc.org.au
Please note
This page is a general equipment guide for Australian dental practices. It is not clinical guidance and is not a substitute for your sedation training, your practice protocols, or the manufacturer's instructions for use.
Product features are taken from manufacturer documentation and may change. Accutron, ClearView, Matrx, Dynomite, Porter and Silhouette are trademarks of their respective owners. Nitrous oxide sedation equipment should only be used by appropriately trained practitioners.
If you want help matching equipment to your practice, call Mega Medical on 1300 881 824.